MEET US

Hyvolution Chile

From 02/09/2025 to 04/09/2025

Metropolitan Santiago

Vitacura - Chili

SCHWEISSEN & SCHNEIDEN

From 15/09/2025 to 19/09/2025

Essen - Germany

Medica

From 17/11/2025 to 20/11/2025

Stand : 11F41 (Hall 11)

Düsseldorf - Germany

Hyvolution Paris

From 27/01/2026 to 29/01/2026

PARIS Expo - Porte de Versailles

Paris - France

World Health Expo

From 09/02/2026 to 12/02/2026

Dubaï World Trade Center

Dubaï - United Arab Emirates

Hospitalar Sao Paulo

From 19/05/2026 to 22/05/2026

Hospitalar Sao Paulo

Sao Paulo - Brazil

NEW PRODUCTS

PIVO-700 Swivel fitting connector

The PIVO-700 swivel fitting connector is designed to protect any device at risk of being subjected to torque during handling. Installed on a fixed component (e.g. a high-pressure collector), its swivel function eliminates any risk of torsion that could damage or shorten the life of the equipment.

H35 Fuelling flexible hose for high flow

The H35 fuelling flexible hose is intended for the transfer of hydrogen gas from the dispenser to the vehicle tank up to a working pressure of 350 bar maximum. Thanks to its passage diameter of 10 mm allowing the transfer of large H2 flows, this flexible hose is mainly intended for use on fuelling stations for heavy vehicles such as trucks, buses, trains and boats. This flexible hose meets the requirements of the ISO 19880-5: 2019 standard and is only suitable for dispensing hydrogen gas at service stations meeting the requirements of ISO 19880-1:2020.

500 bar HP stand

The 500 bar HP stand is a component of a HP Hydrogen (or any non-corrosive and non-oxidizing industrial gases) distribution system. It enables the connection of one (or several) cylinder bundles or a trailer to a transfer panel, an equipment (change-over unit, regulator…) or a pipeline. There are models with one, two or three inlets on a collector. The HP 500 bar stands may be connected in line.

Where are we?

To contact us

|

|

|

Quote Request

Demande de Rappel