H35 Fuelling flexible hose for high flow
HYDROGEN
The H35 fuelling flexible hose is intended for the transfer of hydrogen gas from the dispenser to the vehicle tank up to a working pressure of 350 bar maximum. Thanks to its passage diameter of 10 mm allowing the transfer of large H2 flows, this flexible hose is mainly intended for use on fuelling stations for heavy vehicles such as trucks, buses, trains and boats. This flexible hose meets the requirements of the ISO 19880-5: 2019 standard and is only suitable for dispensing hydrogen gas at service stations meeting the requirements of ISO 19880-1:2020.
CARACTERISTICS
| Nominal inlet pressure | 350 bar |
| Nominal outlet pressure max | 482 bar |
| Test pressure | 735 bar |
| Burst pressure | > 1750 bar |
| T°min | -40°C |
| T°max | +65°C |
MATERIALS
| Material | Polyamide |
| Shaft | Micro-perforated polyurethane |
CONFIGURATION
| Inlet connection | 9/16-18 UNF – 2B (9/16 JIC-37°) |
| Outlet connection | 9/16-18 UNF – 2B (9/16 JIC-37°) |
| Gas | H2 |
